Technological Innovation | New Energy-Saving Rotary Kiln
Published:
2026-11-21 08:06
Source:
Energy-saving rotary kiln for ferromolybdenum roasting As an important piece of equipment in the roasting process, it has reached technological maturity after several upgrades; however, during actual operation, due to limitations imposed by its internal structure, the following issues arise: Drawbacks and problems :
1. There is a significant temperature difference between the inner and outer cylinders, necessitating an expansion device. Over prolonged use, this design may develop weld failures and damage.
2. At the expansion device, an expansion joint must be provided in the castable lining; moreover, since thermal expansion and deformation are concentrated at this location, the castable is prone to spalling and damage, which can lead to ablation and deformation of the shell.
3. After prolonged use, if the insulation material becomes carbonized, repairing or replacing it is difficult; it requires working on the entire inner cylinder and refractory castable, necessitating destruction of the inner cylinder and remaking it, resulting in a long construction period and high difficulty.
4. The insulation layer at the expansion joint is relatively thin, resulting in poor thermal insulation; additionally, heat conduction through the annular support flange of the inner cylinder—due to these two factors—causes an annular high-temperature zone to appear on the outer cylinder.
5. The internal utilization of the cylinder is low; since production is proportional to the square of the kiln’s effective inner diameter, its output is limited.
New Type Energy-Saving Rotary Kiln Modify the rotary kiln shell air duct 、 Insulation layer structure type Having successfully resolved the aforementioned issues, compared with previous energy-saving rotary kilns, it offers the following advantages: Advantages :
1. For rotary kilns of the same specification, the effective inner diameter is increased. For equipment of the same specifications, output increases by more than 20%.
2. Internal is Integral structure , without installing an expansion device, not There are instances of weld seam cracking and damage on the cylinder body.
3. The whole Uniform expansion of the cylinder body , there is no concentrated expansion or contraction point, thereby avoiding the problem of localized spalling of the castable. Furthermore, the castable’s Increased thickness Up to 120mm, greatly Improve the service life of castables.
4. The insulation layer is installed on the outside of the cylinder. , replacing or repairing the insulation layer does not require disturbing the internal cylinder or the castable lining, and can be done from the outside, Easy and fast construction Quick.
5. Perform insulation work on the entire outer surface of the cylinder. , the construction results are better and more able to Ensure its thermal insulation performance.
6. Use the heat-exchanged hot air to enter the rotary kiln, further Increase equipment output per operating hour.
7. Better suited for upgrading legacy products 。
On-site photos of a new energy-efficient rotary kiln for ferromolybdenum roasting




Related News