Ball mill

The ball mill is the key equipment for crushing the material after it has been crushed. This type of grinding machine is equipped with a certain number of steel balls in its cylinder as grinding media for dry or wet grinding of various ores and other grindable materials. The ball mill is suitable for grinding various ores and other materials. It is widely used in mineral processing, building materials and chemical industries. It can be divided into dry and wet grinding methods. According to different mining methods, it can be divided into two types: lattice type and overflow type.

Message

Tel

13324215382

Category:

Regular Products

产品详情

product description

Technical performance and characteristics

Reasonable design, stable operation
The hollow shaft is made of cast steel, the inner lining can be replaced, the rotary large gear is processed by casting hobbing, and the barrel is embedded with wear-resistant lining, which has good wear resistance. The machine runs smoothly and works reliably.

Easy to operate
Easy to operate, safe and reliable Small size, simple and convenient installation, low noise, less dust, good environmental protection; good mechanical performance, simple operation, convenient maintenance.

working principle

The mill is used to open the powder in the grinding system and grind the material into finished products. The material enters the feeding device through the hopper, enters the grinding machine through the feeding screw barrel in the hollow shaft, and the crushed material enters the cylinder through the grinding, and the material is ground into fine powder in the cylinder. The powdery material that meets the process requirements is then fed into the unloading bin through the boring of the slab, and the lifting slab is forcedly fed into the discharging screw by the lifting slab in the unloading bin, and sent to the conveying equipment through the spinning spiral of the discharging screw. Then, the conveying material feeds the powdery material into the classifier, and after the selection of the powder selecting machine, the coarse particles are ground and then ground, and the desired powder is delivered to the finished product warehouse.

Product atlas

Technical Parameters

Specification model	Loading amount(t)	Feeding particle size(mm)	Discharge size(mm)	Production(t/h)	Motor power(KW)	Weight(T)
Φ900×1800	1.5	≤20	0.075 -0.89	0.65 －2	18.5	3.6
Φ900×2100	1.3-1.4	≤15	0.075 -0.83	0.7－3.5	18.5	3.9
Φ900×3000	2.7	≤20	0.075 -0.89	1.1-3.5	22	4.5
Φ1200×2400	3.8	≤25	0.075 -0.6	1.5-4.8	30	11.5
Φ1200×2800	3.3-3.5	≤25	0.075 -0.6	2-6	30	13
Φ1200×4500	7	≤25	0.074 -0.4	1.6-5.8	45	13.8
Φ1500×3000	8	≤25	0.074 -0.4	2-5	75	17
Φ1500×3500	6.75-6.4	≤25	0.075 -0.4	3-7	75	17.5
Φ1500×4500	14	≤25	0.074 -0.4	3.5-12	110	21
Φ1500×5700	15	≤25	0.074 -0.4	3.5-8	115	24.7
Φ1830×3000	18	≤25	0.074 -0.4	4-10	130	28
Φ1800×3600	10.6-11.4	≤25	0.075 -0.4	5-22	130	33.5
Φ1830×7000	25	≤25	0.074 -0.4	7.5-17	210	36
Φ2100×3600	14-15.2	≤25	0.075 -0.4	15-36	370	46.8
Φ2200×5500	30	≤25	0.074 -0.4	10-20	210	48.5
Φ2200×6500	31	≤25	0.074 -0.4	14-26	380	52.8
Φ2200×7500	33	≤25	0.074 -0.4	16-29	380	56
Φ2400×3000	15.5-16.6	≤25	0.075 -0.4	22-24	245	59
Φ2400×4500	30	≤25	0.074 -0.4	8.5-60	380	65
Φ2700×3600	39	≤25	0.074 -0.4	12-70	400	91.3
Φ2700×4000	40	≤25	0.074 -0.4	12-80	400	94
Φ2700×4500	48	≤25	0.074 -0.4	12-90	430	102
Φ3200×4500	65	≤25	0.075-0.4	By process conditions	800	137