Run mill

The grinding machine is the main equipment in the pellet process. It processes materials with a water content of 8 to 13, so that the materials are thoroughly mixed and refined, and the surface area of the material particles is increased. The use of a grinding machine can shorten the production process of the pellets, save energy consumption of the equipment, and improve the quality of the ore and metal, improve the working conditions and environmental conditions, so it is rapidly promoted in the pellet process.

Message

Tel

13324215382

Category:

Regular Products

产品详情

product description

Technical performance and characteristics

Save energy and increase intensity
Forced feeding, peripheral discharge, rubber lining. The grinding machine is the main equipment in the pellet process. It processes materials with a water content of 8 to 13, so that the materials are thoroughly mixed and refined, and the surface area of the material particles is increased.

Low energy consumption, less pollution
Shorten the production process of pellets, save energy consumption of equipment, and improve the quality of pellets and metal recovery, improve working conditions and environmental protection conditions, so it has been rapidly promoted in the pellet technology.

working principle

When the simplified gear rotates by the surrounding large gears, the material is impacted by the grinding medium steel ball, and the ball between the ball and the ball and between the ball and the cylinder liner, so that the material fully exposes the fresh surface and is fully mixed. The mill is discharged through the discharge hole and enters the next process. This machine can effectively reduce the amount of bentonite added and increase the strength of green balls.

Product atlas

Technical Parameters

Specification model	Loading amount(t)	Feeding particle size(mm)	Discharge size(mm)	Production(t/h)	Motor power(KW)	Weight(T)
Φ900×1800	1.5	≤20	0.075 -0.89	0.65 －2	18.5	3.6
Φ900×2100	1.3-1.4	≤15	0.075 -0.83	0.7－3.5	18.5	3.9
Φ900×3000	2.7	≤20	0.075 -0.89	1.1-3.5	22	4.5
Φ1200×2400	3.8	≤25	0.075 -0.6	1.5-4.8	30	11.5
Φ1200×2800	3.3-3.5	≤25	0.075 -0.6	2-6	30	13
Φ1200×4500	7	≤25	0.074 -0.4	1.6-5.8	45	13.8
Φ1500×3000	8	≤25	0.074 -0.4	2-5	75	17
Φ1500×3500	6.75-6.4	≤25	0.075 -0.4	3-7	75	17.5
Φ1500×4500	14	≤25	0.074 -0.4	3.5-12	110	21
Φ1500×5700	15	≤25	0.074 -0.4	3.5-8	115	24.7
Φ1830×3000	18	≤25	0.074 -0.4	4-10	130	28
Φ1800×3600	10.6-11.4	≤25	0.075 -0.4	5-22	130	33.5
Φ1830×7000	25	≤25	0.074 -0.4	7.5-17	210	36
Φ2100×3600	14-15.2	≤25	0.075 -0.4	15-36	370	46.8
Φ2200×5500	30	≤25	0.074 -0.4	10-20	210	48.5
Φ2200×6500	31	≤25	0.074 -0.4	14-26	380	52.8
Φ2200×7500	33	≤25	0.074 -0.4	16-29	380	56
Φ2400×3000	15.5-16.6	≤25	0.075 -0.4	22-24	245	59
Φ2400×4500	30	≤25	0.074 -0.4	8.5-60	380	65
Φ2700×3600	39	≤25	0.074 -0.4	12-70	400	91.3
Φ2700×4000	40	≤25	0.074 -0.4	12-80	400	94
Φ2700×4500	48	≤25	0.074 -0.4	12-90	430	102
Φ3200×4500	65	≤25	0.075-0.4	By process conditions	800	137